Makerspace at Napa Valley College: Projects

Parts: 

Flight controller

• STM32F103C8T6
• MPU-605 gyro / accelerometer
• M8N GPS module with integrated HMC5883L compass
• MS5611 barometer
• Flysky FS-i6X transmitter with IA6B Receiver
• 2 100 ohm, 1k ohm, 10k ohm resistors
• Glass fiber prototyping PCB 3mm LEDs, red and green

The Frame

• 450 size frame with integrated power distribution board
• 4 920kv dc motors
• 3S 5000mAh 30C lipo battery
• 10x4.5 propellers 
• 4 30A ESC
• battery XT60 connector

The telemetry system 

• Arduino Uno
• LCD breakout board with buttons
• Buzzer module
• APC220 Wireless RF Modules with USB Converter

• TV
• HDMI cable
• Raspberry pi 3 
• 2 Player Arcade Joystick DIY 12V 28MM 24MM Buttons
• Coin machine
• 24v led strip
• 32gb sd card
• MDF wood

• 1/4 plywood 24x12
• 2 Dc motors
• Transmitter and receiver 
• Motor controller 
• plastic wheels
• gears

Parts: 

• Asus Geforce 4070 Super (GPU)
• ROG Strix B650-A Gaming Wifi (Motherboard)
• Kraken Elite 280 Rgb (Radiator)
• AMD 7700 RYZEN 7 (CPU)
• Vengeance RGB DDR5 32GB (RAM) 
• 750e Corsair (Power Supply)
• 2T M.2 (Storage)
• H5 Elite NZXT (Case)

Parts: 

Flight controller

• Arduino Uno (Rev 3)
• L3G4200D Tri-axis gyro
• 9X Turnigy Transmitter
•  330 ohm, 1.5k ohm, 1k ohm resistors
• Power distribution board, 3mm LEDs red 

The Frame

• 450 size frame with integrated power distribution board
• 4 920kv dc motors
• 3S 3000mAh 20C lipo battery
• 10x4.5 propellers 
• 4 20A ESC

• Resin 
• pearl white PLA filament
• Green PLA filament
• 1x2 DC Buck Converter
• SG90 Servo 1x6
• Arduino Uno
• jumperwires
• Breadboard
• 24x12 1/4in plywood
• PVC pipe 
• Zip ties 
• gear
• Vex servo 1x4
• wood glue
• movement sensor
• aluminum vex plates 1x3

• Yellow PLA filament
• Silver, Black Spray Paint
• Baseball hat
• Bondo
• Backer Rod 
• copper couplings
• sunglasses 
• Hot Glue

• Resin 
• Green PLA Filament
• DC Buck Converter
• SG90 Servo 1x6
• Arduino Uno
• Joystick
• jumperwires
• Breadboard

• Custom PCB board 
• Vex plates 
• LCD screen
• jumperwires 

Solar Module

spec 10W

Pmax = 10W

Vpm = 17.9V

Ipm = 0.56A

Voc = 22.41V

Isc = 0.61A

Battery

Brand: Expert Power

Battery type: lead acid battery

12V 1.3Ah/20HR

      Voltage Regulation          initial current

standby use 13.50-13.80V   less than 0.39A

Cycle use     14.40-14.70V   les than 0.39A

• Arduino Uno
• H-bridge
• lipo 2200mAh
• Turnigy 9x transmitter/receiver

Parts:

• Corsair 4000D Mid Tower (Case)
• ROG Strix 790-H Gaming Wifi (Motherboard)
• Corsair 850 (Power Supply)
• Intel i71200K (CPU)
• Corsair H100x RBG Elite (Radiator)
• Ventus 3x 4070 (GPU)
• Evo M.2 2T (Storage)
• Trident 2X16 (RAM)

• Arduino Uno
• Keyes ardunino shield
• Ps3 controller/usb receiver
• Relay
• Dc buck converter
• H-bridge
• 2200mAh lipo